(40 Reviews)

1.2003 carbon steel 4,7mm / 60mm / 710mm

27,90 €

incl. 19% VAT , plus

Carbon steel for your first selfmade knife! Easy to work with and really tough and sharp.

Please select a size:

Available immediately

Delivery time: 1 - 3 Workdays

1.2003 carbon steel 4,7mm / 60mm / 710mm

27,90 €

incl. 19% VAT , plus

Description
Reviews

c: 0,75% / Mn: 0,7% / Si: 0,25%

If you start with the forging of knives and blades, this steel is the right choice!

Hardness approximately 60 HRC
Color if used in damascus: grey
Indulgent while processing and hardening
Hardening in clay produces subtle Hamon
Advice for your first knife, machete and fencing swords
Sharpness level B and C

Hardening:. 820 ° / annealing at 180 ° C for 1 hour to pale yellow = ca. 59-60 HRC

Important info: The Steel is soft annealed and comes to us in big sheets (about 2x1m). The sheets are cut for us into stripes of 40 to 60mm.
Because of the cutting process the steel may be a little twisted, but it is easy to bend it straight again by using your knee, a vice, or hammer and anvil.